Skip to content
bnb·explorer
EN

Live · USDT BEP20 scanner

USDT BEP20: contract address, scan and track USDT transactions

Paste a USDT transaction hash or a wallet address to check a Tether transfer on BNB Smart Chain: status, real recipient, amount and fee. Below: the verified contract, how approvals work and how BEP20 compares with TRC20 and ERC20.

Regulated exchange partner · FinCEN-registered MSB · GFSC-authorised

Network
Reading the chain…

USDT BEP20 is Tether’s dollar stablecoin on BNB Smart Chain. Its only genuine contract is 0x55d398326f99059fF775485246999027B3197955, with 18 decimals. To track a USDT BEP20 transaction, paste the hash into a BEP20 explorer, check that the status is Success and read the recipient and amount in the token transfers list.

That one paragraph answers most questions, but USDT is also where most expensive mistakes on BNB Smart Chain happen: fake tokens with the same name, payments sent on the wrong network, wallets that cannot move USDT because they hold no BNB, and old approvals that let a drainer empty a balance. This page covers each, with the tools to check for yourself. For other tokens, the BEP-20 token explorer has the general method and a table of verified contracts.

USDT BEP20 token address (verified)

We verified the contract in November 2026 by calling it directly on BNB Chain’s public RPC: name() returned “Tether USD”, symbol() returned “USDT” and decimals() returned 18. Explorers may show a different label — BscScan calls it Binance-Peg BSC-USD (BSC-USD), because the token is issued on BNB Smart Chain by Binance and backed by USDT that Binance holds, rather than minted natively by Tether. It is still the USDT that exchanges credit when you deposit “USDT via BEP20”.

USDT on BNB Smart Chain

Network
BNB Smart Chain (BSC), chain ID 56
Token standard
BEP-20
Name / symbol on-chain
Tether USD / USDT
Explorer label
Binance-Peg BSC-USD (BscScan)
Decimals
18 (USDT on Ethereum and Tron uses 6)
Gas paid in
BNB

Copy the address from a trusted source, and compare the first and last six characters every time you paste it. If you add USDT to MetaMask or Trust Wallet by hand, the wallet fills in symbol and decimals from the contract; if it shows anything other than USDT and 18, you have the wrong address. Our MetaMask guide covers adding BNB Smart Chain itself.

How to check a USDT BEP20 transaction by hash

A USDT BEP20 hash check takes under a minute in any explorer. The routine is the same in our lookup, BscScan and BSCTrace:

  1. 1

    Get the transaction hash

    Ask the sender (or open your exchange’s withdrawal history) for the TxID. On BNB Smart Chain it is 0x followed by 64 hex characters.

  2. 2

    Paste it into a BEP20 scanner

    Use the search on this page, BscScan or BSCTrace. Make sure the network is BNB Smart Chain mainnet, not testnet or opBNB.

  3. 3

    Check the status

    Success means the transfer is final. Failed means nothing moved, although gas was paid. “Not found” usually means a different network or an incomplete hash.

  4. 4

    Read the token transfer, not the To field

    The To field shows the USDT contract. The real recipient and amount are in the token transfers list: look for the 0x55d3…7955 contract and your address.

  5. 5

    Confirm the contract is genuine

    If the token transferred is not 0x55d3…7955, it is not real USDT, whatever name and logo the wallet shows.

Try it on this real USDT transfer. It was confirmed in block 123,772,659 and moved 1,136.82 USDT. The raw amount in the Transfer event is 1,136,820,000,000,000,000,000 — divide by 1018 and you get the human figure. It used 34,515 gas, which at the 0.05 gwei floor is about 0.0000017 BNB. A successful BSC transaction is final within roughly a second, so “Success plus the right recipient and amount” is proof of payment you can share. Our guide on reading a BSC transaction explains every other field on the page.

How to track USDT BEP20 transactions for a wallet

To follow a wallet rather than a single payment, search the address instead of a hash. On BscScan open the Token Transfers (BEP-20) tab and filter by the USDT contract; BSCTrace has the same tab. You see every incoming and outgoing USDT transfer with timestamps and counterparties, and both sites can export the list to CSV for bookkeeping. Our lookup shows the USDT balance read straight from the contract plus recent token transfers, which is enough to confirm whether a payment landed.

A few patterns are worth recognising. Many zero-value or dust transfers from addresses that look like ones you know are address poisoning: the attacker hopes you will copy their look-alike address from your history next time. Large transfers to and from labelled exchange wallets are usually deposits and withdrawals. To keep watching a wallet over time — balances, approvals, whale moves — see our BNB wallet tracking guide, and for a token-first view of a wallet’s holdings in dollars, the Binplorer review.

USDT token approvals: check and revoke

Swapping or depositing USDT on a DeFi app usually starts with an approve transaction that lets the app’s contract spend your USDT. Many apps ask for an unlimited allowance so you never have to approve again. That permission stays on-chain until you remove it, and it is exactly what wallet drainers abuse: if the approved contract is malicious or later compromised, it can move your USDT without another signature from you.

Check your approvals regularly. BscScan’s Token Approval Checker lists every allowance an address has granted, and Revoke.cash supports BNB Smart Chain as well. Revoking is an ordinary transaction that sets the allowance to zero, so it costs a little BNB in gas. Revoke anything you do not recognise first, then anything unlimited that you no longer use. And never sign an approval or “permit” from a site you reached through an unsolicited token or a DM.

USDT BEP20 vs TRC20 vs ERC20: fees and compatibility

Exchanges offer USDT on several networks, and the three most common are BEP20 (BNB Smart Chain), TRC20 (Tron) and ERC20 (Ethereum). They are the same dollar-pegged asset on three separate ledgers. Here is how they differ in practice:

USDT networks compared (November 2026)
BEP20 (BSC)TRC20 (Tron)ERC20 (Ethereum)
Address format0x…, 42 charsT…, 34 chars0x…, 42 chars
USDT decimals1866
Fee paid inBNBTRX (energy / bandwidth)ETH
Typical transfer feeFractions of a cent at 0.05 gweiHigher unless you hold staked energy; variesVaries with Ethereum base fee; usually the highest
Finality≈ 1 secondAbout a minuteAbout 13 minutes for full finality
Same address as ERC20?Yes, for self-custody walletsNo—

The fee you actually pay when withdrawing from an exchange is set by the exchange, not the network, so compare it on the withdrawal screen. On-chain, BEP20 is consistently among the cheapest: the gas cost of a transfer at today’s floor is easy to model with our BSC gas fee calculator.

Compatibility is where money gets lost. Tron addresses start with T, so wallets and exchanges reject them on BSC and vice versa — that mismatch is hard to get wrong. BEP20 and ERC20 addresses look identical, and for a self-custody wallet such as MetaMask they are literally the same address on both chains. Send BEP20 USDT to an address someone gave you “for ERC20” and the transaction succeeds on BSC. If the address is your own wallet, add BNB Smart Chain and the USDT appears. If it belongs to an exchange, only that exchange can recover it.

Glowing network of nodes illustrating USDT moving between wallets on BNB Smart Chain
↳Same dollar, three ledgers: always match the network on both sides of a USDT transfer

Common USDT BEP20 mistakes and how to avoid them

  • Wrong network on withdrawal. The recipient expects TRC20 or ERC20 and you pick BEP20 because it is cheapest. Always ask which network, and send a small test first.
  • No BNB for gas. A wallet with 1,000 USDT and 0 BNB cannot move anything. Keep a small BNB balance in every BSC wallet.
  • Fake USDT. Tokens called “Tether USD” with the symbol USDT are airdropped to wallets, often with a fake dollar value. If the contract is not 0x55d3…7955, ignore it — never “claim” or “swap” it. Our BSC token checker guide explains how these scams work.
  • Address poisoning. Copying an address from your transaction history instead of from the source. Check more than the first and last few characters.
  • Missing memo or tag. Some exchanges use a shared deposit address with a memo for certain assets. USDT BEP20 deposits normally need only the address, but if the deposit page shows a memo field, fill it in.
  • Confusing testnet with mainnet. Testnet USDT from a faucet has no value and lives at a different contract. See the BSC testnet explorer if you are developing.

USDT BEP20 not arrived? What to check

Work through this in order. 1. Search the hash: if it shows Success, the tokens are on BNB Smart Chain at the recipient address in the token transfers list. 2. Compare that address character by character with the intended one. 3. If the recipient is an exchange, check that it supports USDT deposits on BEP20 for that address; exchanges often need a number of confirmations and a few minutes to credit. 4. If the recipient’s wallet does not show the balance, they may simply not have BNB Smart Chain or the USDT token added — the funds are there, the display is not. 5. If the explorer says the hash does not exist, the transaction was never broadcast or was sent on another network; ask for the hash again and check Tron or Ethereum explorers.

When you contact support, send the transaction hash and a link from an explorer. That single link proves the network, the contract, the amount and the recipient, and it is the fastest way to get a wrong-network deposit looked at. To compare explorers for this job, see our BNB explorer ranking.

From scan to wallet

Hold the real USDT, on the network you chose.

Buy USDT and BNB for gas on a regulated exchange that has operated since 2013, withdraw over BNB Smart Chain and verify the transfer here in seconds.

Open account Partner link. Crypto assets are volatile; only invest what you can afford to lose.
  • Operating since 2013
  • FinCEN-registered MSB (USA)
  • GFSC-authorised DLT provider (Gibraltar)
  • Card, bank transfer and BNB withdrawals to your own wallet

Keep exploring

FAQ

Frequently asked questions

01

What is the USDT BEP20 contract address?

The USDT contract on BNB Smart Chain is 0x55d398326f99059fF775485246999027B3197955. Called directly, it returns the name “Tether USD”, the symbol USDT and 18 decimals; BscScan labels it Binance-Peg BSC-USD. Any other contract named USDT on BSC is not this token.
02

How do I track a USDT BEP20 transaction?

Paste the transaction hash into a BEP20 explorer such as the search on this page, BscScan or BSCTrace. Check that the status is Success, then look at the token transfers section: it shows the USDT contract, the sender, the real recipient and the amount. The To field of the transaction itself shows the USDT contract, not the recipient.
03

Is USDT BEP20 the same as USDT TRC20 or ERC20?

They track the same dollar value but live on separate blockchains. BEP20 USDT is on BNB Smart Chain, TRC20 on Tron and ERC20 on Ethereum. You cannot send one network’s USDT to another network’s address and expect it to arrive there; pick the same network on both sides, or use an exchange or bridge to switch.
04

Why does my USDT BEP20 transfer need BNB?

Every transaction on BNB Smart Chain pays gas in BNB, including token transfers. At the 0.05 gwei network floor a USDT transfer of roughly 35,000–55,000 gas costs about 0.0000017–0.0000028 BNB, but with a zero BNB balance the wallet cannot send anything.
05

Can a USDT BEP20 transaction be reversed?

No. Once a transaction is confirmed on BNB Smart Chain, which takes about a second, nobody can reverse it — not the explorer, not BNB Chain. Only the recipient can send the funds back, which is why a small test transfer to a new address is worth the extra second.