Binplorer is a BNB Chain explorer built around BEP-20 tokens by the team behind Ethplorer. It shows every token a wallet holds with dollar values, token pages with price, holders and transfers, and a free API that works with a public key. It does not verify contracts or let you read and write them, so it complements BscScan rather than replacing it.
In our BNB explorer ranking Binplorer sits at number five with 7.6 out of 10 — a low overall position that hides a sharp specialist. If your question is about tokens, it is often the fastest answer on the network. If your question is about a contract, a failed transaction or a validator, it is the wrong tool. Here is where the line runs.
What is Binplorer?
Ethplorer has been a go-to token explorer for Ethereum for years. Binplorer is its BNB Chain sibling: the same interface, the same data model and the same API, pointed at BNB Smart Chain. The site links to the rest of the family in its footer — Ethplorer for Ethereum, Lineaplorer for Linea and explorers for Ethereum testnets — and the shared API documentation says that endpoints and API keys work the same across all of them.
The main menu is short: Top Tokens (the 50 most active tokens), Performance (an overview of how BEP-20 tokens are moving), Last Tx (a live feed of recent token operations) and API. The search box takes a token name, a token or wallet address, or a transaction hash. There is no block list, gas tracker or validator page; for those, BSCTrace and BscScan are better homes, as our BSCTrace review shows.
Binplorer token pages: price, holders and transfers
Open a token and Binplorer gives you its summary in one panel: symbol, price, volume, total supply, market cap, decimals, owner, number of transfers and number of holders. Below it are tabs for Transfers (with sub-tabs for transactions, mints and burns), Issuances and Holders, plus the contract’s creator, creation transaction and creation date. For the USDT BEP20 contract, for instance, it shows the creator address and the September 2020 deployment.
One caveat matters for stablecoins and bridged assets. The price block comes from market data for the asset as a whole, so the market cap shown on the USDT BEP20 page reflects Tether overall, not the supply that exists on BNB Smart Chain. Use the holders and transfers tabs for BSC-specific activity. And as on every explorer, the name on the page proves nothing: compare the contract address with a trusted list such as our USDT BEP20 page or the BEP-20 token explorer table.
Wallet pages: the BEP-20 portfolio view
This is Binplorer’s strongest feature. Paste a wallet address and you get the BNB balance plus every token it holds, split into BEP-20, ERC-721 and ERC-1155 tabs, with dollar values where price data exists and a total. On BscScan the same information is spread over a token-holdings dropdown and several tabs; on Binplorer it is the first thing you see. The information panel adds total in, total out, number of transfers and number of transactions.
Transaction pages are compact but complete for token work: status, block and confirmations, from and to, value, gas limit, gas used, gas price, transaction cost, nonce, method and parsed input data, with the token operations decoded underneath. What you do not get are internal transactions or event logs in the BscScan sense, so to debug a failed swap, follow our guide to reading a BSC transaction on a full explorer.
Tags, alerts and CSV exports
Binplorer has a few personal tools that full explorers often lock behind accounts. You can attach tags and notes to any address or transaction; by default they live only in your browser and can be exported or imported as JSON, with no sign-up. Logging in syncs them across devices. Watch settings on an address let you receive notifications about its activity, and CSV export downloads up to 500 records from a transfer list — enough for a monthly statement, not for a full audit. Every address also has a QR code for quick sharing.
The free Binplorer API
Since the free BscScan API for BNB Smart Chain ended in December 2025, Binplorer’s API has become one of the simplest free data sources for BEP-20 tokens. It is a REST API at https://api.binplorer.com/ and accepts the public key freekey with no registration. We ran these calls in November 2026 and all three returned data:
# token metadata, price and holders count (free public key)
curl "https://api.binplorer.com/getTokenInfo/0x55d398326f99059fF775485246999027B3197955?apiKey=freekey"
# every BEP-20 balance of a wallet, with USD rates where available
curl "https://api.binplorer.com/getAddressInfo/0xYourWallet?apiKey=freekey"
# last token operations of a wallet
curl "https://api.binplorer.com/getAddressHistory/0xYourWallet?apiKey=freekey&type=transfer&limit=50" freekey limits (Ethplorer API docs, November 2026)
- Rate
- 2 requests/second · 20/minute · 100/hour
- Daily / weekly
- 1,000 per 24 hours · 3,000 per week
- Per response
- Max 100 operations, 100 token balances, 100 top holders
- History window
- Timestamps up to 30 days old
- Production use
- Not recommended — create a personal key in the API Panel
Useful methods include getTokenInfo, getAddressInfo, getTxInfo, getTokenHistory, getAddressHistory and getTopTokenHolders. For balances and contract calls without any key, BNB Chain’s public RPC is still the better fit; for long transfer histories, MegaNode’s enhanced API on BSCTrace. Our BNB Chain explorer API guide puts all of them side by side.
Limits and caveats
- No contract tooling. No source code view, no verification, no Read or Write Contract, no proxy detection. You cannot check a token’s owner powers here; use our BSC honeypot checker guide for that.
- Token-centric transactions. Plain BNB transfers and contract calls without token movements are shown, but internal transactions and logs are not decoded the way BscScan does it.
- Global market data. Price, volume and market cap describe the asset across all chains, which can mislead on bridged tokens.
- Few labels. Address names are sparse compared with BscScan, so you will rely on your own tags.
- Export ceiling. CSV downloads stop at 500 records.
Binplorer vs BscScan vs BSCTrace
All three read the same chain, so balances and transfers always agree. They differ in what they put first.
| Feature | Binplorer | BscScan | BSCTrace |
|---|---|---|---|
| Wallet token portfolio in USD | One view | Dropdown + tabs | Holdings tab |
| Free API for BSC | freekey, no sign-up | Paid (Etherscan V2) | MegaNode free plan |
| Contract source / Read & Write | No | Yes | Yes |
| Contract verification | No | Yes | Yes |
| Address labels | Few + private tags | Very rich | Major entities |
| Validators, blocks, gas | No | Yes | Yes |
| CSV export | Up to 500 rows | Yes | Yes |
The practical split: Binplorer for “what is in this wallet and what is it worth”, BscScan for “who is this address and what can this contract do”, BSCTrace for a clean explorer with a free developer API. Our BscScan alternatives page covers OKX Explorer, Blockchair and 3xpl as well.
Binplorer scores, pros and cons
Binplorer score breakdown
- Data depth & accuracy — 30%7.0
- Speed under load — 20%8.2
- Developer API — 20%8.4
- Usability on mobile — 15%7.6
- Safety & transparency — 15%7.2
The weighted total is 7.6. The API and speed score well; data depth loses most because there is no contract layer; safety is held back by the absence of token risk warnings, which means you need a separate scanner before buying anything.
Strengths
- Best wallet portfolio view on BSC, with USD values
- Free API with a public
freekey, no sign-up - Same API as Ethplorer — one integration for two chains
- Private tags and notes stored locally, JSON export
- Address watch notifications
- Fast, uncluttered token pages with holders and issuances
Weaknesses
- No contract source, verification or Read/Write
- No blocks, validators or gas tracker
- Market data is global, not BSC-specific
- CSV export capped at 500 records
- freekey limited to 1,000 calls a day and 30 days of history
Who Binplorer suits best
Holders and accountants who want a clean list of a wallet’s tokens with dollar values will like it most — it is the quickest way to see a BEP-20 portfolio without connecting a wallet anywhere. Developers building small dashboards or bots get a free token API that also works on Ethereum with the same code. Researchers can use the holder and issuance tabs for a first look at a token’s distribution.
Traders checking a new token should not stop here: Binplorer will not tell you whether the owner can mint, blacklist or raise taxes. Use it next to a full explorer and a honeypot checker. To track a single payment, our own BNB transaction lookup is quicker still.
Verdict: 7.6 / 10. Binplorer is the best tool on BNB Smart Chain for answering “what tokens does this wallet hold, and what are they worth?”, and its free API is one of the few that still needs no sign-up. It is not a full block explorer: there is no contract verification, no Read/Write tab and little validator or block data, so keep BscScan or BSCTrace open alongside it.